NUST INSTITUTE OF CIVIL ENGINEERING
Department: Structure Department Research Publications

Research Publications

2023

  1. Rehman, Saif Ur, Muhammad Usman, Muhammad Huzaifa Younus Toor, and Qalandar Ali Hussaini. “Advancing Structural Health Monitoring: A Vibration-Based IoT Approach for Remote Real-Time Systems." Sensors and Actuators A: Physical (2023): 114863.
  2. Riaz, Raja Dilawar, Muhammad Usman, Ammar Ali, Usama Majid, Muhammad Faizan, and Umair Jalil Malik. “Inclusive characterization of 3D printed concrete (3DPC) in additive manufacturing: A detailed review." Construction and Building Materials 394 (2023): 132229.
  3. Hafeez, Hammad, Waqas Ahmad, Muhammad Usman, and Asad Hanif. “Effect of Different Confinements on High-Strength Steel Fiber-Reinforced Concrete (SFRC) Beams." Arabian Journal for Science and Engineering (2023): 1-14.
  4. Ali, Ammar, Raja Dilawar Riaz, Umair Jalil Malik, Syed Baqar Abbas, Muhammad Usman, Mati Ullah Shah, In-Ho Kim, Asad Hanif, and Muhammad Faizan. “Machine Learning-Based Predictive Model for Tensile and Flexural Strength of 3D-Printed Concrete." Materials 16, no. 11 (2023): 4149.
  5. Abbasi, Sana, Malik Adeel Umer, Muhammad Irfan, Muhammad Siyar, Muhammad Usman, and Muhammad Talha Masood. “Enhanced Mechanical Properties of Surface Modified and Silica Reinforced Nomex Sandwich Composites." Materials Today Communications (2023): 106346.
  6. Iqbal, Mehvesh, Muhammad Usman, Ghulam Hussain, Malik Adeel Umer, Wasim Khaliq, and Asad Hanif. “Development of mortar filled honeycomb sandwich panels for resistance against repeated ballistic impacts." Journal of Materials Research and Technology 24 (2023): 8121-8134.
  7. Riaz, Raja Dilawar, Umair Jalil Malik, Mati Ullah Shah, Muhammad Usman, and Fawad Ahmed Najam. “Enhancing Seismic Resilience of Existing Reinforced Concrete Building Using Non-Linear Viscous Dampers: A Comparative Study." In Actuators, vol. 12, no. 4, p. 175. MDPI, 2023.
  8. Nisar, Kashan, Muhammad Shahid Siddique, Muhammad Rizwan, Syed Hassan Farooq, Muhammad Usman, and Asad Hanif. “Effect of multiwalled carbon nanotubes on compressive behavior of concrete at elevated temperature for mass concreting." European Journal of Environmental and Civil Engineering (2023): 1-24.
  9. Shah, Mati Ullah, Syed Waiz Shah, Syed Hassan Farooq, Muhammad Usman, and Farhan Ullah. “Experimental investigation of tuned liquid column ball damper’s position on vibration control of structure using different fluids." Innovative Infrastructure Solutions 8, no. 3 (2023): 111.
  10. Shah, Mati Ullah, Muhammad Usman, Syed Hassan Farooq, and Muhammad Rizwan. “Spring-controlled modified tuned liquid column ball damper for vibration mitigation of structures." Journal of Sound and Vibration 545 (2023): 117443.
  11. Dawood, Sania, Muhammad Usman, Mati Ullah Shah, and Muhammad Rizwan. “Self-centering passive base isolation system incorporating shape memory alloy wires for reduction in base drift." Smart Structures and Systems 31, no. 5 (2023): 531-543.
  12. Umer, Muhammad, Junaid Ahmad, Muhammad Saleem Abdullah, Hamas Ahmad Khan, Shehroze Ali, and Muhammad Umair Younas. “Mechanical properties and life cycle assessment of sugarcane bagasse and corn cob ashes‐based geopolymer concrete to promote circular economy." Structural Concrete.
  13. Kanwal, Maria, Fazal Adnan, Rao Arsalan Khushnood, Amna Jalil, Hammad Anis Khan, Abdul Ghafar Wattoo, and Sajid Rasheed. “Biomineralization and corrosion inhibition of steel in simulated bio-inspired self-healing concrete." Journal of Building Engineering (2023): 108224.
  14. Khan, Nangyaley, Hammad Anis Khan, Rao Arsalan Khushnood, Muhammad Faraz Bhatti, and Danish Ilyas Baig. “Self-healing of recycled aggregate fungi concrete using Fusarium oxysporum and Trichoderma longibrachiatum." Construction and Building Materials 392 (2023): 131910.
  15. Baloch, Hassan, Steffen Grünewald, and Stijn Matthys. “Assessment of shrinkage and bond behaviour of high performance cement-based composites as a repair mortar." Developments in the Built Environment 15 (2023): 100203.

2022

  1. Aleem, Muhammad Ashar Ul, Muhammad Shahid Siddique, Syed Hassan Farooq, Muhammad Usman, Muhammad Hamza Ahsan, Manzoor Hussain, and Asad Hanif. “Axial compressive behavior of concrete incorporating crumb rubber pretreated with waste quarry dust." Journal of Building Engineering 59 (2022): 105086.
  2. Shah, Mati Ullah, Muhammad Usman, In-Ho Kim, and Sania Dawood. “Analytical and experimental investigations on the performance of tuned liquid column ball damper considering a hollow ball." Structural Engineering and Mechanics, An Int’l Journal 83, no. 5 (2022): 655-669.
  3. Rasheed, Abdur, Muhammad Usman, Muhammad Zain, and Nadeem Iqbal. “Machine Learning-Based Fragility Assessment of Reinforced Concrete Buildings." Computational Intelligence and Neuroscience 2022 (2022).
  4. Tahir, Shayan, Muhammad Usman, and Malik Adeel Umer. “Effect of volume fraction on shear mode properties of Fe-Co and Fe-Ni filled magneto-rheological elastomers." Polymers 14, no. 14 (2022): 2968.
  5. Khan, Muhammad Ilyas, Mati Ullah Shah, and Muhammad Usman. “Experimental Investigation of Concrete Properties using Locally available Coarse Aggregates in Punjab, Pakistan." NUST Journal of Engineering Sciences 15, no. 1 (2022): 26-29.
  6. Shah, Mati Ullah, and Muhammad Usman. “An experimental study of tuned liquid column damper controlled multi-degree of freedom structure subject to harmonic and seismic excitations." Plos one 17, no. 6 (2022): e0269910.
  7. Ullah, Safi, Syed Hassan Farooq, Muhammad Usman, Burhan Ullah, Manzoor Hussain, and Asad Hanif. “In-Plane Seismic Strengthening of Brick Masonry Using Steel and Plastic Meshes." Materials 15, no. 11 (2022): 4013.
  8. Ahsan, Muhammad Hamza, Muhammad Shahid Siddique, Syed Hassan Farooq, Muhammad Usman, Muhammad Ashar Ul Aleem, Manzoor Hussain, and Asad Hanif. “Mechanical behavior of high-strength concrete incorporating seashell powder at elevated temperatures." Journal of Building Engineering 50 (2022): 104226.
  9. Mehmood, Kashif, Malik Adeel Umer, Ahmed Umar Munawar, Muhammad Imran, Muhammad Shahid, Muhammad Ilyas, Rabeeka Firdous, Humaira Kousar, and Muhammad Usman. “Microstructure and corrosion behavior of atmospheric plasma sprayed NiCoCrAlFe high entropy alloy coating." Materials 15, no. 4 (2022): 1486.
  10. Ullah, Qareeb, Rao Arsalan Khushnood, Sajjad Ahmad, Muhammad Usman, Shad Muhammad, and Jean-Marc Tulliani. “Performance Evaluation of MWCNTs Reinforced Cement Mortar Composites using Natural and Commercial Surfactants." Journal of Wuhan University of Technology-Mater. Sci. Ed. 37, no. 1 (2022): 47-57.
  11. Ahmad, Junaid, Tao Yu, and Muhammad NS Hadi. “Effect of Natural Fiber Reinforced Polymer Confinement on Axial Compressive Strength of Concrete." In 8th International Conference on Advanced Composite Materials in Bridges and Structures: Volume 1, pp. 131-137. Cham: Springer International Publishing, 2022.
  12. Ullah, Haji Sami, Rao Arsalan Khushnood, Junaid Ahmad, and Furqan Farooq. “Predictive modelling of sustainable lightweight foamed concrete using machine learning novel approach." Journal of Building Engineering 56 (2022): 104746.
  13. Hadi, Muhammad NS, Junaid Ahmad, and Tao Yu. “Investigation of BFRP bar reinforced geopolymer concrete filled BFRP tube columns." Proceedings of the Institution of Civil Engineers-Structures and Buildings 175, no. 8 (2022): 628-643.
  14. Ullah, Haji Sami, Rao Arsalan Khushnood, Furqan Farooq, Junaid Ahmad, Nikolai Ivanovich Vatin, and Dina Yehia Zakaria Ewais. “Prediction of compressive strength of sustainable foam concrete using individual and ensemble machine learning approaches." Materials 15, no. 9 (2022): 3166.
  15. Khan, Azam, Moiz Tariq, Asad Ullah, and Arshad Hussain. “An Improved Linear Complementarity Solver for the Dynamic Analysis of Blast Loaded Structures." International Journal of Concrete Structures and Materials 16, no. 1 (2022): 1-25.
  16. Tariq, Moiz, Azam Khan, and Asad Ullah. “Predicting the Response of RC Beam from a Drop-Weight Using Gene Expression Programming." Materials 15, no. 19 (2022): 6910.
  17. Tariq, Moiz, Azam Khan, Asad Ullah, Muhammad Waseem, Hassan Nasir, and Irfan Jamil. “Shear Strength Model for Reinforced Concrete Corner Joints Based on Soft Computing Techniques." Advances in Civil Engineering 2022 (2022).
  18. Tariq, Moiz, Azam Khan, Asad Ullah, Bakht Zamin, Kazem Reza Kashyzadeh, and Mahmood Ahmad. “Gene Expression Programming for Estimating Shear Strength of RC Squat Wall." Buildings 12, no. 7 (2022): 918.
  19. Khan, Sultani Mulk, Muhammad Usman Hanif, Azam Khan, Muhammad Usman Hassan, Ahad Javanmardi, and Atif Ahmad. “Damage assessment of reinforced concrete beams using cost-effective MEMS accelerometers." In Structures, vol. 41, pp. 602-618. Elsevier, 2022.
  20. Khan, Azam, Moiz Tariq, Asad Ullah, Niaz B. Khan, and Mohammed Jameel. “Flexure and shear response of an impulsively loaded rigid-plastic beam by enhanced linear complementarity approach." Scientific Reports 12, no. 1 (2022): 9893.
  21. Tariq, Moiz, Azam Khan, Asad Ullah, Javad Shayanfar, and Momina Niaz. “Improved shear strength prediction model of steel fiber reinforced concrete beams by adopting gene expression programming." Materials 15, no. 11 (2022): 3758.
  22. Tariq, Moiz, Azam Khan, and Mujahid Khan. “Experimental study of scour hole depth around bridge pile using efficient cross-section." Applied Sciences 12, no. 10 (2022): 5205.
  23. Ali, Haider, Niaz Bahadur Khan, Muhammad Jameel, Azam Khan, Muhammad Sajid, Adnan Munir, A. El-Sayed Ahmed, Khalid Abdulkhaliq M. Alharbi, and Ahmed M. Galal. “Numerical investigation of the effect of spanwise length and mesh density on flow around cylinder at Re= 3900 using LES model." Plos one 17, no. 4 (2022): e0266065.
  24. Aziz, Waqas, Muhammad Aslam, Muhammad Fahad Ejaz, M. Jahanzaib Ali, Riaz Ahmad, M. Wajeeh-ul-Hassan Raza, and Azam Khan. “Mechanical properties, drying shrinkage and structural performance of coconut shell lightweight concrete." In Structures, vol. 35, pp. 26-35. Elsevier, 2022.
  25. Hussain, Saqib, Musaad Zaheer Nazir Khan, and Hammad Anis Khan. “Bond performance of basalt FRP bar against aggressive environment in high-strength concrete with varying bar diameter and bond length." Construction and Building Materials 349 (2022): 128779.
  26. Sardar, Hassan, Rao Arsalan Khushnood, Wasim Khaliq, Hammad Anis Khan, and Muhammad Farhan Saleem. “Influence of pyrolytic waste tire residue on the residual performance of high strength concrete exposed to elevated temperatures." Journal of Building Engineering 54 (2022): 104657.
  27. Khan, Hammad A., Muhammad Yasir, and Arnaud Castel. “Performance of cementitious and alkali-activated mortars exposed to laboratory simulated microbially induced corrosion test." Cement and Concrete Composites 128 (2022): 104445.
  28. Shahid, Maheen, Irfan Ahmad Rana, Ali Jamshed, Fawad Ahmed Najam, Ather Ali, and Ayman Aslam. “Quantifying the role of social capital for enhancing urban resilience against climate crisis: Empirical evidence from formal and informal settlements of Pakistan." Cities 130 (2022): 103851.
  29. Farhan Mushtaq, Sardar, Ather Ali, Rao Arsalan Khushnood, Rana Faisal Tufail, Ali Majdi, Adnan Nawaz, Serdar Durdyev, Dumitru Doru Burduhos Nergis, and Jawad Ahmad. “Effect of Bentonite as Partial Replacement of Cement on Residual Properties of Concrete Exposed to Elevated Temperatures." Sustainability 14, no. 18 (2022): 11580.
  30. Ali, Asher, Irfan Ahmad Rana, Ather Ali, and Fawad Ahmed Najam. “Flood risk perception and communication: The role of hazard proximity." Journal of environmental management 316 (2022): 115309.
  31. Baloch, Hassan, Steffen Grünewald, and Stijn Matthys. “Different Approaches for FEM Modelling of Strain-Hardening Cementitious Composites." In Fibre Reinforced Concrete: Improvements and Innovations II: X RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB) 2021 10, pp. 389-399. Springer International Publishing, 2022.

2021

  1. Shah, Mati Ullah, Muhammad Usman, Syed Hassan Farooq, and In-Ho Kim. “Effect of tuned spring on vibration control performance of modified liquid column ball damper." Applied Sciences 12, no. 1 (2021): 318.
  2. Khan, Imdad Ullah, Muhammad Usman, and Muhammad Tanveer. “Vibration control of an irregular structure using single and multiple tuned mass dampers." Proceedings of the Institution of Civil Engineers-Structures and Buildings (2021): 1-13.
  3. Hanif, Asad, and Muhammad Usman. “Fly ash cenosphere: characterization, processing, and properties." Handbook of Fly Ash; Butterworth-Heinemann: Oxford, UK (2021): 57.
  4. Zain, Muhammad, Muhammad Usman, and Syed Hassan Farooq. “A framework with reduced computational burden for seismic fragility assessment of reinforced concrete buildings in high-intensity seismic zones." In Structures, vol. 33, pp. 3055-3065. Elsevier, 2021.
  5. Yang, Hee Jun, Muhammad Usman, and Asad Hanif. “Suitability of liquid crystal display (LCD) glass waste as supplementary cementing material (SCM): Assessment based on strength, porosity, and durability." Journal of Building Engineering 42 (2021): 102793.
  6. Ullah, Najeeb, Muhammad Usman, Syed H. Farooq, Wahab Ashraf, and Asad Hanif. “Effect of steel and concrete thickness on shear strength of square concrete filled double skin tubular beams." Case Studies in Construction Materials 14 (2021): e00478.
  7. Ullah, Najeeb, Muhammad Usman, Syed H. Farooq, Wahab Ashraf, and Asad Hanif. “Effect of steel and concrete thickness on shear strength of square concrete filled double skin tubular beams." Case Studies in Construction Materials 14 (2021): e00478.
  8. Shah, Mati Ullah, Muhammad Usman, Muhammad Usman Hanif, Iqra Naseem, and Sara Farooq. “Utilization of solid waste from brick industry and hydrated lime in self-compacting cement pastes." Materials 14, no. 5 (2021): 1109.
  9. Shah, Mati Ullah, and Muhammad Usman. “Feasibility study of liquid tuned column hollow ball damper for vibration control of structures." In Proceedings of the 2021 World Congress on Advances in Structural Engineering and Mechanics (ASEM21), GECE, Seoul, Korea, pp. 23-26. 2021.
  10. Tariq, Muhammad Ahsan, Muhammad Usman, Syed Hassan Farooq, Imran Ullah, and Asad Hanif. “Investigation of the structural response of the mre-based mdof isolated structure under historic near-and far-fault earthquake loadings." Applied Sciences 11, no. 6 (2021): 2876.
  11. Kim, Seungwon, Muhammad Usman, Cheolwoo Park, and Asad Hanif. “Durability of slag waste incorporated steel fiber-reinforced concrete in marine environment." Journal of Building Engineering 33 (2021): 101641.
  12. Ali, Shehroze, Junaid Ahmad, M. Neaz Sheikh, Tao Yu, and Muhammad NS Hadi. “Analytical load-moment (PM) interaction diagrams of GFRP bar reinforced circular geopolymer concrete columns." In Structures, vol. 34, pp. 2445-2454. Elsevier, 2021.
  13. Ahmad, Junaid, Shehroze Ali, Tao Yu, M. Neaz Sheikh, and Muhammad NS Hadi. “Analytical investigation on the load-moment interaction behavior of the FRP reinforced geopolymer concrete filled FRP tube circular columns." Journal of Building Engineering 42 (2021): 102818.
  14. Ahmad, Junaid, Tao Yu, and Muhammad NS Hadi. “Behavior of GFRP bar reinforced geopolymer concrete filled GFRP tube columns under different loading conditions." In Structures, vol. 33, pp. 1633-1644. Elsevier, 2021.
  15. Ahmad, Junaid. “Structural Behavior of Circular Geopolymer Concrete Filled Fiber Reinforced Polymer (FRP) Tube Columns Internally Reinforced with FRP Bars under Different Loading Conditions." (2021).
  16. Ahmad, Junaid, Tao Yu, and Muhammad NS Hadi. “Basalt Fiber-Reinforced Polymer-Confined Geopolymer Concrete." ACI Structural Journal 118, no. 1 (2021).
  17. Khan, Azam, Irshad Ahmad, Wajid Khan, Niaz Bahadur Khan, and Muhammad Aslam. “A modified Lemke Algorithm for dynamic rigid plastic response of skeletal structures." Computers & Structures 256 (2021): 106638.
  18. Tariq, Moiz, Azam Khan, Javad Shayanfar, Muhammad Usman Hanif, and Asad Ullah. “A regression model for predicting the shear strength of RC knee joint subjected to opening and closing moment." Journal of Building Engineering 41 (2021): 102727.
  19. Saleem, Babar, Arshad Hussain, Afaq Khattak, and Azam Khan. “Performance evaluation of bacterial self-healing rigid pavement by incorporating recycled brick aggregate." Cement and Concrete Composites 117 (2021): 103914.
  20. Rafique, Umer, Ather Ali, and Ali Raza. “Structural behavior of GFRP reinforced recycled aggregate concrete columns with polyvinyl alcohol and polypropylene fibers." Advances in Structural Engineering 24, no. 13 (2021): 3043-3056.
  21. Hasnain, Muhammad Hamza, Usman Javed, Ather Ali, and Muhammad Saeed Zafar. “Eco-friendly utilization of rice husk ash and bagasse ash blend as partial sand replacement in self-compacting concrete." Construction and Building Materials 273 (2021): 121753.
  22. Baloch, Hassan, Steffen Grünewald, Karel Lesage, and Stijn Matthys. “Influence of different fibre types on the rheology of strain hardening cementitious composites." In Fibre Reinforced Concrete: Improvements and Innovations: RILEM-fib International Symposium on FRC (BEFIB) in 2020 10, pp. 3-11. Springer International Publishing, 2021.

2020

  1. Arslan Hafeez, Muhammad, Muhammad Usman, Malik Adeel Umer, and Asad Hanif. “Recent progress in isotropic magnetorheological elastomers and their properties: A review." Polymers 12, no. 12 (2020): 3023.
  2. Tanveer, Muhammad, Muhammad Usman, Imdad U. Khan, Syed H. Farooq, and Asad Hanif. “Material optimization of tuned liquid column ball damper (TLCBD) for the vibration control of multi-storey structure using various liquid and ball densities." Journal of Building Engineering 32 (2020): 101742.
  3. Lee, Hyeongi, Asad Hanif, Muhammad Usman, Younghwan Kim, Hongseob Oh, and Seong Kyum Kim. “Interfacial Characteristics of cement mortars containing aggregate derived from industrial slag waste." Journal of Structural Integrity and Maintenance 5, no. 4 (2020): 236-243.
  4. Memon, Shazim Ali, Muhammad Zain, Dichuan Zhang, Sardar Kashif Ur Rehman, Muhammad Usman, and Deuckhang Lee. “Emerging trends in the growth of structural systems for tall buildings." Journal of Structural Integrity and Maintenance 5, no. 3 (2020): 155-170.
  5. Khayam, Sadia Umer, Muhammad Usman, Malik Adeel Umer, and Ahmed Rafique. “Development and characterization of a novel hybrid magnetorheological elastomer incorporating micro and nano size iron fillers." Materials & Design 192 (2020): 108748.
  6. ArslanHafeez, Muhammad, Muhammad Usman, Muhammad Adnan Arshad, and Malik AdeelUmer. “Nanoindentation-based micro-mechanical and electrochemical properties of quench-hardened, tempered low-carbon steel." Crystals 10, no. 6 (2020): 508.
  7. Hafeez, Muhammad Arslan, Aqil Inam, Misbah Ul Hassan, Malik Adeel Umer, Muhammad Usman, and Asad Hanif. “Optimized corrosion performance of AISI 1345 steel in hydrochloric acid through thermo-mechanical cyclic annealing processes." Crystals 10, no. 4 (2020): 265.
  8. Ahmad, Waqas, Syed Hassan Farooq, Muhammad Usman, Mehran Khan, Ayaz Ahmad, Fahid Aslam, Rayed Al Yousef, Hisham Al Abduljabbar, and Muhammad Sufian. “Effect of coconut fiber length and content on properties of high strength concrete." Materials 13, no. 5 (2020): 1075.
  9. Usman, Muhammad, Syed Hassan Farooq, Mohammad Umair, and Asad Hanif. “Axial compressive behavior of confined steel fiber reinforced high strength concrete." Construction and Building Materials 230 (2020): 117043.
  10. Ashraf, W., M. Usman, S. H. Farooq, N. Ullah, and S. Saleem. “Flexural Properties of Concrete Filled Double Skin (SHS outer and SHS inner) Tubular Beams." In Proc. Inst. Civ. Eng. Struct. Build. 2020.
  11. Hassan, Muhammad Ammad, Muhammad Usman, Asad Hanif, Syed Hassan Farooq, and Jamil Ahmed. “Improving structural performance of timber wall panels by inexpensive FRP retrofitting techniques." Journal of Building Engineering 27 (2020): 101004.
  12. Khan, Hammad A., Arnaud Castel, and Mohammad SH Khan. “Corrosion investigation of fly ash based geopolymer mortar in natural sewer environment and sulphuric acid solution." Corrosion Science 168 (2020): 108586.
  13. Sadiq, Muhammad, Rao Arslalan Khushnood, Muhammad Ilyas, Wasim Khaliq, Shaukat Ali Khan, and Pan Rong. “Comparative Assessment of Impact Analysis Methods Applied to Large Commercial Aircraft Crash on Reinforced Concrete Containment." PLoS ONE 15 no. 10(2020): e0237264.
  14. Sadiq, Muhammad, Wasim Khaliq, Muhammad Ilyas, Rao Arsalan Khushnood, Shaukat Ali Khan, and Pan Rong. “Analysis of Full-Scale Aircraft Impact to Reinforced Concrete and Steel Plate Reinforced Concrete Multiple Barriers Protecting Nuclear Power Plants." Structures 27 (2020): 732-746.

2019

  1. Khan, Bilal Lal, Hassan Farooq, Muhammad Usman, Faheem Butt, Abdul Qudoos Khan, and Asad Hanif. “Effect of soil–structure interaction on a masonry structure under train-induced vibrations." Proceedings of the Institution of Civil Engineers-Structures and Buildings 172, no. 12 (2019): 922-934.
  2. Tanveer, Muhammad, Muhammad Usman, Imdad Ullah Khan, Shakil Ahmad, Asad Hanif, and Syed Hassan Farooq. “Application of tuned liquid column ball damper (TLCBD) for improved vibration control performance of multi-storey structure." PLoS One 14, no. 10 (2019): e0224436.
  3. Zain, Muhammad, Muhammad Usman, Syed Hassan Farooq, and Tahir Mehmood. “Seismic vulnerability assessment of school buildings in seismic zone 4 of Pakistan." Advances in Civil Engineering 2019 (2019): 1-14.
  4. Khan, Muhammad I., Muhammad Usman, Syed A. Rizwan, and Asad Hanif. “Self-consolidating lightweight concrete incorporating limestone powder and fly ash as supplementary cementing material." Materials 12, no. 18 (2019): 3050.
  5. Khan, Rizwan, Syed Hassan Farooq, and Muhammad Usman. “Blast loading response of reinforced concrete panels externally reinforced with steel strips." Infrastructures 4, no. 3 (2019): 54.
  6. Kim, Yongjae, Asad Hanif, Muhammad Usman, and Wonjun Park. “Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics–Porosity assessment based on pore segmentation from backscattered electron image analysis." Construction and Building Materials 212 (2019): 149-163.
  7. Baloch, Hassan, Muhammad Usman, Syed A. Rizwan, and Asad Hanif. “Properties enhancement of super absorbent polymer (SAP) incorporated self-compacting cement pastes modified by nano silica (NS) addition." Construction and Building Materials 203 (2019): 18-26.
  8. Ali, Azam, Talha Yousaf Sandhu, and Muhammad Usman. “Ambient vibration testing of a pedestrian bridge using low-cost accelerometers for SHM applications." Smart Cities 2, no. 1 (2019): 20-30.
  9. Hanif, Asad, Yongjae Kim, Pavithra Parthasarathy, Muhammad Usman, and Zongjin Li. “Flexural fatigue behavior of lightweight ferrocement: experimental investigation & numerical modeling." (2019).
  10. Fawad, Muhammad, K. Kalman, R. A. Khushnood, and Muhammad Usman. “Retrofitting of damaged reinforced concrete bridge structure." Procedia Structural Integrity 18 (2019): 189-197.
  11. Khan, Bilal L., Muhammad Azeem, Muhammad Usman, Syed H. Farooq, Asad Hanif, and Muhammad Fawad. “Effect of near and far Field Earthquakes on performance of various base isolation systems." Procedia Structural Integrity 18 (2019): 108-118.
  12. Ali, Yasir, Muhammad Irfan, Abdul Salam Buller, Hammad A. Khan, and Hafiz MF Gul. “A binary logistic model for predicting the tertiary stage of permanent deformation of conventional asphalt concrete mixtures." Construction and Building Materials 227 (2019): 116608.
  13. Khan, Hammad, Arnaud Castel, James Aldred, Stephen Foster, and Jerry Sunarho. “Field investigation of biogenic corrosion of mortar specimens at North Head Wastewater Treatment Plant." (2019).
  14. Khan, Hammad A., Arnaud Castel, Mohammad SH Khan, and Aziz H. Mahmood. “Durability of calcium aluminate and sulphate resistant Portland cement based mortars in aggressive sewer environment and sulphuric acid." Cement and Concrete Research 124 (2019): 105852.
  15. Khan, Hammad Anis. “Durability of alkali-activated mortar in sewage environment." PhD diss., UNSW Sydney, 2019.
  16. Baloch, Hassan, Muhammad Usman, Syed A. Rizwan, and Asad Hanif. “Properties enhancement of super absorbent polymer (SAP) incorporated self-compacting cement pastes modified by nano silica (NS) addition." Construction and Building Materials 203 (2019): 18-26.
  17. Iqbal, Shahid, Ihsan Ali, Shah Room, Shaukat Ali Khan, and Ahsan Ali. “Enhanced Mechanical Properties of Fiber Reinforced Concrete Using Closed Steel Fibers." Materials and Structures (2019).
  18. Ali, Muhammad Usman, Shaukat Ali Khan, Muhammad Yousaf Anwar, and Uzair Maqbool. “Seismic Vulnerability of Non-Ductile RC Buildings in Pakistan Through Stochastic Analysis of Design/Construction Deficiencies." Bulletin of Earthquake Engineering 17(2019): 759-780.

2018

  1. Hanif, Asad, Yongjae Kim, Muhammad Usman, and Cheolwoo Park. “Optimization of steam-curing regime for recycled aggregate concrete incorporating high early strength cement—A parametric study." Materials 11, no. 12 (2018): 2487.
  2. Zain, Muhammad, Muhammad Usman, Syed H. Farooq, and Asad Hanif. “Progressive structural capacity loss assessment—A framework for modern reinforced concrete buildings." Plos one 13, no. 12 (2018): e0208149.
  3. Ahmad, Jamil, M. Usman, M. A. Hassan, S. H. Farooq, and A. Hanif. “Enhancing lateral load performance of traditional timber wall (Dhajji-Dewari) by strengthening of joints." In IOP Conference Series: Materials Science and Engineering, vol. 431, p. 072002. IOP Publishing, 2018.
  4. Rasheed, A., M. Usman, H. Farooq, and A. Hanif. “Effect of super-plasticizer dosages on fresh state properties and early-age strength of concrete." In IOP Conference Series: Materials Science and Engineering, vol. 431, no. 6, p. 062010. IOP Publishing, 2018.
  5. Farooq, H., M. Usman, K. Mehmood, M. S. Malik, and A. Hanif. “Effect of steel confinement on axially loaded short concrete columns." In IOP Conference Series: Materials Science and Engineering, vol. 414, no. 1, p. 012026. IOP Publishing, 2018.
  6. Usman, Muhammad, Asfand Y. Khan, Syed H. Farooq, Asad Hanif, Shengwen Tang, Rao A. Khushnood, and Syed A. Rizwan. “Eco-friendly self-compacting cement pastes incorporating wood waste as cement replacement: A feasibility study." Journal of Cleaner Production 190 (2018): 679-688.
  7. Rasheed, Abdur, Syed H. Farooq, Muhammad Usman, Asad Hanif, Noman A. Khan, and Rao A. Khushnood. “Structural reliability analysis of superstructure of highway bridges on China-Pakistan Economic Corridor (CPEC): A case study." Journal of Structural Integrity and Maintenance 3, no. 3 (2018): 197-207.
  8. Usman, Muhammad, Asad Hanif, In-Ho Kim, and Hyung-Jo Jung. “Experimental validation of a novel piezoelectric energy harvesting system employing wake galloping phenomenon for a broad wind spectrum." Energy 153 (2018): 882-889.
  9. Ahmed, Wisal, Rao Arsalan Khushnood, Shazim Ali Memon, Sajjad Ahmad, Waqas Latif Baloch, and Muhammad Usman. “Effective use of sawdust for the production of eco-friendly and thermal-energy efficient normal weight and lightweight concretes with tailored fracture properties." Journal of Cleaner Production 184 (2018): 1016-1027.
  10. Hanif, Asad, Muhammad Usman, Zeyu Lu, Yu Cheng, and Zongjin Li. “Flexural fatigue behavior of thin laminated cementitious composites incorporating cenosphere fillers." Materials & Design 140 (2018): 267-277.
  11. Kim, Yongjae, Asad Hanif, Muhammad Usman, Muhammad Junaid Munir, Syed Minhaj Saleem Kazmi, and Samsoo Kim. “Slag waste incorporation in high early strength concrete as cement replacement: Environmental impact and influence on hydration & durability attributes." Journal of Cleaner Production 172 (2018): 3056-3065.
  12. Shamim, Arslan, Sajjad Ahmad, Anwar Khitab, Waqas Anwar, Rao Arsalan Khushnood, and Muhammad Usman. “Applications of nano technology in civil engineering: a review." International Journal of Strategic Engineering (IJoSE) 1, no. 1 (2018): 48-64.
  13. Lee, Hyeongi, Asad Hanif, Muhammad Usman, Jongsung Sim, and Hongseob Oh. “Performance evaluation of concrete incorporating glass powder and glass sludge wastes as supplementary cementing material." Journal of Cleaner Production 170 (2018): 683-693.
  14. Mushtaq, Arslan, Shaukat Ali Khan, Junaid Ahmad, and M. Usman Ali. “Effect of 3D models on seismic vulnerability assessment of deficient RC frame structures." Australian journal of structural engineering 19, no. 3 (2018): 214-221.
  15. Rashid, Hafiz Muhammad, Shaukat Ali Khan, Rao Arsalan Khushnood, and Junaid Ahmad. “Lateral Load Performance Analysis of Dhajji Dewari Using Different Infills." International Journal of Strategic Engineering (IJoSE) 1, no. 2 (2018): 1-12.
  16. Khan, Hammad A., Mohammad SH Khan, Arnaud Castel, and Jerry Sunarho. “Deterioration of alkali-activated mortars exposed to natural aggressive sewer environment." Construction and Building Materials 186 (2018): 577-597.
  17. Javaid, Muhammad Salik, and Shaukat Ali Khan. “Aquifers Today and Tomorrow." In Aquifers – Matrix and Fluids, Chapter 1(2018), Pages 1-4.
  18. Mushtaq, Arslan, Shaukat Ali Khan, Junaid Ahmad, and M. Usman Ali. “Effect of 3D models on seismic vulnerability assessment of deficient RC frame structures." Australian journal of structural engineering 19, no. 3 (2018): 214-221
  19. Mushtaq, Arslan, Shaukat Ali Khan, Junaid Ahmad, and M. Usman Ali. “Effect of 3D models on seismic vulnerability assessment of deficient RC frame structures." Australian journal of structural engineering 19, no. 3 (2018): 214-221.

2017

  1. Qureshi, Liaqat Ali, Junaid Ahmad, and Hammad Salahuddin. “Seismic vulnerability assessment of strengthened glass fiber reinforced concrete (GFRC)." KSCE Journal of Civil Engineering 21 (2017): 2235-2244.
  2. Ali, Yasir, and Hammad Anis Khan. “Performance Evaluation of Resin As a Coating Agent." Jordan Journal of Civil Engineering 11, no. 4 (2017).
  3. Khan, Hammad Anis, Arnaud Castel, and Mohammad Shakhawat Hossain Khan. “Performance evaluation of geopolymer against in situ aggressive sewer environment." Concrete 2017 (2017).
  4. Salahuddin, Hammad, Shaukat Ali Khan, Muhammad Usman Ali, and Arslan Mushtaq. “Seismic vulnerability assessment of CFRP strengthened RC structures." Građevinar 69, no. 02. (2017): 121-130.
  5. Ali, Muhammad Usman, Shaukat Ali Khan, and Muhammad Yousaf Anwar. “Application of BCP-2007 and UBC-97 in Seismic Vulnerability Assessment of Gravity Designed RC Buildings in Pakistan." Frontiers of Structural and Civil Engineering 11(2017): 396-405.
  6. Haider, Sajjad, Hamza Farooq Gabriel, and Shaukat Ali Khan. 2017. “Supercritical Flow Simulation at a Right Channel Junction. Comparison between a Uniform and a Sparse Mesh." KSCE Journal of Civil Engineering 21(7): 2984-2990.
  7. Ali, Muhammad Usman, Shaukat Ali Khan, Muhammad Yousaf Anwar, Abdul Aleem, Saim Raza, and Uzair Maqbool. 2017. “Seismic Performance of Deficient Masonry Infill Reinforced-Concrete Structures." Proceedings of the Institution of Civil Engineers: Structures and Buildings 170(2): 143-155.
  8. Salahudin, Hammad, Shuakat Ali Khan, Muhammad Usman Ali, and Arslan Mushtaq. 2017. “Seismic Vulnerability Assessment of CFRP Strengthened RC Structures." Gradevinar Journal of Civil Engineering 69(2): 121-130.

2016

  1. Usman, Muhammad, In-Ho Kim, and Hyung-Jo Jung. “Improving thermoelectric energy harvesting efficiency by using graphene." AIP Advances 6, no. 5 (2016).
  2. Usman, Muhammad, Asad Hanif, In-Ho Kim, and Hyung-Jo Jung. “Experimental validation of a novel piezoelectric energy harvesting system employing wake galloping phenomenon for a broad wind spectrum." Energy 153 (2018): 882-889.
  3. Usman, Muhammad. “Energy harvesting system using solar and wind energy for structural health monitoring applications." (2016).
  4. Ather Ali, Partha Mandal, Tom Swailes. “Seismic Strengthening of Masonry for Developing Countries”. The University of Manchester MACE PGR Conference (2016): 2397-7833
  5. Saeed, Hafiz Zain, Hammad Anis Khan, and Rashid Farooq. “Experimental investigation of stress–strain behavior of CFRP confined Low Strength Concrete (LSC) cylinders." Construction and Building Materials 104 (2016): 208-215.
  6. Ahmad, Habib, Shaukat Ali Khan, and Attaullah Shah. 2016. “Seismic Hazard Assessment by Preparing S1 and Ss Maps for Baluchistan Province, Pakistan." Journal of Himalayan Earth Sciences 49(2): 129-136.
  7. Rizwan, Muhammad, Shaukat Ali Khan, Muhammad Ilyas, and Raja Rizwan Hussain. 2016. “Modelling Steel-Strip-Confined Reinforced-Concrete Columns." Proceedings of the Institution of Civil Engineers – Structures and Buildings 169(4): 245-256.

2015

  1. Usman, M., and H. J. Jung. “Recent developments of magneto-rheological elastomers for civil engineering applications." Smart Material Actuators: Recent Advances in Material Characterization and Application; Nova Science Publishers: Hauppauge, NY, USA (2015).
  2. Khaliq, Wasim, and Hammad Anis Khan. “High temperature material properties of calcium aluminate cement concrete." Construction and Building Materials 94 (2015): 475-487.
  3. KHALIQ, WASIM, and HAMMAD ANIS KHAN. “High Temperature Properties of Calcium Aluminate Cement Concrete." Response of Structures Under Extreme Loading (PROTECT 2015) (2015).
  4. Mushtaq, Arslan, Shaukat Ali Khan, Hamza Farooq Gabriel, and Sajjad Haider. “Seismic vulnerability assessment of deficient RC structures with bar pullout and joint shear degradation." Advances in Civil Engineering 2015 (2015): 1-10.
  5. Mushtaq, Arslan, Shaukat Ali Khan, Hamza Farooq Gabriel, and Sajjad Haider. “Seismic vulnerability assessment of deficient RC structures with bar pullout and joint shear degradation." Advances in Civil Engineering 2015 (2015): 1-10.
  6. Ahmad, Sohaib, Shaukat Ali Khan, Kypros Pilakoutas, and Qaiser Uz Zaman Khan. 2015. “Empirical Vulnerability Assessment of the Non-engineered Reinforced Concrete Structures Using the Kashmir Earthquake Damage Data." Bulletin of Earthquake Engineering 13: 2611–2628.
  7. Ali, Muhammad Usman, Shaukat Ali Khan, Muhammad Yousaf Anwar, and Hamza Farooq Gabriel. 2015. “Probabilistic Application in Seismic Vulnerability Assessment of Deficient Low- to Medium-Rise Reinforced Concrete Buildings in Pakistan." Arabian Journal for Science and Engineering 40: 2479–2486.
  8. Mushtaq, Arslan, Shaukat Ali Khan, Hamza Farooq Gabriel, and Sajjad Haider. “Seismic vulnerability assessment of deficient RC structures with bar pullout and joint shear degradation." Advances in Civil Engineering 2015 (2015): 1-10.

2014

  1. Eem, Seung-Hyun, Muhammad Usman, and Hyung-Jo Jung. “Feasibility study on a MR elastomer-based mount system for vibration mitigation." In International Conference on Computational and Experimental Engineering and Sciences (ICCES’14). ICCES, 2014.
  2. Foster, Stephen, Jay Sanjayan, Arnaud Castel, James Aldred, Johnson X. Shen, Marita L. Berndt, Pathmanathan Rajeev et al. “Field performance of geopolymer concrete structures." Cement & Concrete Composites 45 (2014): 125-135.
  3. Khan, H. A., A. Castel, and J. Sunarho. “NEUTRALIZATION AND CORROSION OF GEOPOLYMER MORTAR IN AN AGGRESSIVE SEWER ENVIRONEMENT."
  4. Iftikhar, Hasnain, Muhammad Abbas Qureshi, and Shaukat Ali Khan. 2014. “Estimating Seismic Casualty in Khyber Pakhtunkhwa Province, Pakistan." Life Science Journal 11(9): 492-500.
  5. Shahid, Muhammad, Hamza Farooq Gabriel, Amjad Nabi, Sajjad Haider, Shaukat Ali Khan, and Syed Muhammad Ali Shah. 2014. “Evaluation of Development and Land Use Change Effects on Rainfall-Runoff and Runoff-Sediment Relations of Catchment Area of Simly Lake Pakistan." Life Science Journal 11(7): 11-15.
  6. Khan, Shaukat Ali, and Muhammad Abbas Qureshi. 2014. “Seismic Risk Assessment of Khyber Pakhtunkhwa Province, Pakistan." Life Science Journal 11(2): 28-34.

2013

  1. Khan, A., and Ahmad, I. 2013. “In-Place Analysis of Jacket Offshore Structure under Storm Conditions." Journal of Engineering and Applied Sciences 32(1): 57-66
  2. Khan, A., and Ahmad, I. 2013. “Time History Analysis of Seismically Isolated Fixed Base Offshore Platform." Journal of Engineering and Applied Sciences 32(1): 47-56.
  3. Khan, Azam, David Lloyd Smith, and Bassam A. Izzuddin. “Investigation of rigid-plastic beams subjected to impact using linear complementarity." Engineering structures 50 (2013): 137-148.

2012

  1. Ahmed, S., Usman, M., Jung, H.J., Rao, and TA Bier. “Artificial Neural Network (ANN) Model for the Prediction of the Packing Density of Lawrencepur Sand." International Conference on Advanced Concrete Technology and its Proceeding”

2011

  1. Usman, Muhammad, S. Ahmed, and Hyung-Jo Jung. “State-Switched Control Algorithm fo Multi Degree of Freedom Smart Base Isolation System Employing MR Elastomer." In Proceedings of the International Conference on Earthquake Engineering ans Seismology, Islamabad, Pakistan, pp. 25-26. 2011.

2010

  1. Usman, Muhammad. “Feasibility Study of Base Isolation System based on Magneto-Rheological Elastomers (MREs)." (2010).

2009

  1. Koo, Jeong-Hoi, Dong-Doo Jang, Muhammad Usman, and Hyung-Jo Jung. “A feasibility study on smart base isolation systems using magneto-rheological elastomers." Struct. Eng. Mech 32, no. 6 (2009): 755-770.
  2. Usman, M., S. H. Sung, D. D. Jang, H. J. Jung, and J. H. Koo. “Numerical investigation of smart base isolation system employing MR elastomer." In Journal of Physics: Conference Series, vol. 149, no. 1, p. 012099. IOP Publishing, 2009.
  3. Usman, Muhammad, Dong-Doo Jang, In-Ho Kim, Hyung-Jo Jung, and Jeong-Hoi Koo. “Dynamic testing and modeling of magneto-rheological elastomers." In Smart Materials, Adaptive Structures and Intelligent Systems, vol. 48968, pp. 495-500. 2009.

2008

  1. Jung, Hyung-Jo. “State-switched Controller for Smart Base Isolation System Employing MR Elastomer." In The 21th KKCNN Symposium on Civil Engineering. 2008.
  2. Jang, Dong-Doo, Muhammad Usman, Seung-Hoon Sung, Yeong-Jong Moon, and Hyung-Jo Jung. “Feasibility study of MR elastomer-based base isolation system." Journal of the Computational Structural Engineering Institute of Korea 21, no. 6 (2008): 597-605.

2007

  1. Usman, Muhammad, Asad Hanif, Adnan Ali, M. Arshad Virk, and S. Nasir. 2007. “Seismic Design of a Multi-Storey Commercial Building Using Structural Analysis Software SAP2000." MCE, NUST, Pakistan.

Departments