Lab Commercialization

Structures Laboratory Testing Rates (From December 2021)
Sr. #	Category	Test Description	*Normal Rates (Rs.)**	Sample Requirements
1	Concrete Mix Design	Mix Design without Admixture and SRMs. a) Cement b) Sand c) Coarse aggregate	50,000	5 bags
				15 cubic ft.
				30 cubic ft.
2		Mix Design with OPC and Admixtures. a) Cement b) Sand c) Coarse aggregate	100,000	5 bags
				15 cubic ft.
				30 cubic ft.
3		Mix Design with Admixture, SRMs, and special chemicals. a) Cement b) Sand c) Coarse aggregate	150,000	5 bags
				15 cubic ft.
				30 cubic ft.
4		Special Mix design	Depends on the site and the extent of work.	Depends on the site and the extent of work.
5	Compressive Strength Test	Compressive Strength Test (Cube/Cylinder)	1,000 (Per sample)	3 Samples Per Test
6		Compressive Strength Test (Bricks)	1,000 (Per sample)	3 Samples Per Test
7		Compressive Strength Test (Hollow/Solid Block)	1,500 (Per sample)	3 Samples Per Test
8	Cement Test	Initial Setting Time of Cement	1500 (Per sample)	10 Kg Per Test
9		Final Setting Time of Cement	1500 (Per sample)	10 Kg Per Test
10		Consistency Test (Water Demand of Cement)	1500 (Per sample)	10 Kg Per Test
11		Soundness Test of Cement	1500 (Per sample)	10 Kg Per Test
12		Blaine Fineness Test of Cement	5000 (Per sample)	1 Kg Per Test
13		Compressive Strength of Cement using mortar cube a) Sand b) Cement	7500 (For Single Day Compressive Strength)	1375 g Per Day
13			7500 (For Single Day Compressive Strength)	1 kg Per Day
14	Tensile Test	Rebar Tensile Test (Up to 1-inch Diameter)	1400 (Per sample)	2 Samples Per Test (460mm)
15		Rebar Tensile Test (Above 1-inch Diameter)	2000 (Per sample)	2 Samples Per Test (460mm)
16		Rebar Bend Test (Up to 1-inch Diameter)	800 (Per sample)	1 Samples Per Test (250mm)
17		Bend Test (Above 1–inch Diameter)	1200 (Per sample)	1 Sample Per Test (250 mm)
18		Tensile Test (7 Wire Stand)	5000 (Per sample)	2 Samples Per Test (590 mm)
19		Tensile Test (Bolts)	2500 (Per sample)	2 Samples Per Test
20	Sieve Analysis	Sieve Analysis of Coarse Aggregates	1200	10 Kg Per Test
21		Sieve Analysis of Fine Aggregates	1200	10 Kg Per Test
22		Fineness Modulus (Coarse & Fine Aggregates)	1400	10 Kg Per Test
23	Aggregate Testing	Specific Gravity of Aggregates	2000	10 Kg Per Test
24		Water Absorption of Aggregates	2000	10 Kg Per Test
25		Crushing Value of Coarse Aggregates	3000	10 Kg Per Test
26		Impact Value of Coarse Aggregates	3000	10 Kg Per Test
27	Water Absorption Test	Water Absorption Test (Block/Brick)	2000 (Per sample)	3 Samples Per Test
28	Block Testing	Density (Block/Cube/Cylinder)	500 (Per sample)	3 Samples Per Test
29	Core Extraction	On-site Core Test Extraction	14000 Per Core (Ferro scanning is not included)	–
30	NDT	Non-Destructive Testing (Rebound Hammer, Ultrasonic Test, Depth Meter, Corrosion)	Depends on the site and the extent of the work, to be decided after a field visit by the testing team.**	Depends on the site and the extent of the work, to be decided after a field visit by the testing team.**
31	Structure Level Testing	Testing of Bridges under static and dynamic load test.
32	Structure Level Testing	Load test to check the adequacy of existing structures.

*These rates are for normal testing; multiply these rates by the following factors for witness and urgent tests.

Test Mode	Normal	Witness	Urgent
Factors	1x	1.5x	2.5x
Report Time	5 working days	5 working days	2 working days
Time Slot	–	It will be given according to the lab’s testing schedule, provided no academic activities are going on.	It will be given according to the lab’s testing schedule, provided no academic activities are going on.

**The client will provide transport and accommodation.

Note: Academic activities/ institutional duties will be given first priority.

Email: [email protected]
Tel: +92-51-90854581

Lab Commercialization

Departments