Predictive Modelling of Cohesion and Friction Angle of Soil using Gene Expression Programming: A Step Towards Smart and Sustainable Construction
March 18, 2024
Muhammad Naqeeb Nawaz, Badee Alshameri, Zain Maqsood , Waqas Hassan,
Neural Computing and Applications - Pages 1-22
Comparison of Seepage Evaluation Methods for Earth-Filled Embankments: A Case Study of Sukian Dyke, Mangla Dam
December 11, 2023
Muhammad Hamza Khalid, Tanzeela Yasmin, Badee Alshameri, Syed Muhammad Jamil, Waqas Hassan,
Modeling Earth Systems and Environment - Pages 1-14
An innovative application of fine marble dust for the construction industry to mitigate the piping, internal erosion and dispersion problems of sodium-rich clays
December 08, 2023
Waqas Hassan, Badee Alshameri, Zain Maqsood , Abbas Haider, Syed Muhammad Jamil, Hassan Mujtaba,
Construction and Building materials - Volume 408, Article Number 133834
A novel technique for the construction industry to mitigate dispersibility and internal erosion problems of Sodium rich clays by using Water-Soluble Potassium Rich Ions Material
October 12, 2023
Waqas Hassan, Badee Abdulqawi Hamood Al-Shameri, Abbas Haider, Zain Maqsood, Syed Muhammad Jamil, Arfan Shahzad,
Construction and Building Materials - Volume 400, Article Number 132780
Incorporating potassium-rich waste material in a sustainable way to stabilize dispersive clay: A novel practical approach for the construction industry
October 12, 2023
Waqas Hassan, Badee Abdulqawi Hamood Al-Shameri, Syed Muhammad Jamil, Zain Maqsood, Abbas Haider, Arfan Shahzad,
Construction and Building Materials - Volume 400, Article Number 132717
Investigate and Analysis the Efficiency of Existing Recommendations of Near-Field Effect and Boundary conditions on Bender Element Technique
October 05, 2023
Badee Alshameri,
Pure and Applied Geophysics - Pages 1-17
PET Waste Management in Pakistan Through use of PET Shreds as Additive in Backfill Soil
September 22, 2023
Fawad Sheikh, Badee Alshameri, Zain Maqsood , Abbas Haider, Jawad Hassan,
Environmental Monitoring and Assessment - Volume 195, Article Number 1239
Sustainable incorporation of Plaster of Paris kiln dust for stabilization of dispersive soil: A potential solution for construction industry
September 15, 2023
Bushra Fatima, Badee Abdulqawi Hamood Al-Shameri, Waqas Hassan, Zain Maqsood , S. Muhammad Jamil, Aziman Madun ,
Construction and Building Materials - Volume 397, Article Number 132459
Determination of Ground Motion Parameters of Urban Centers of Balochistan Province
September 12, 2023
Usama Abid, Abbas Haider, Badee Alshameri, Zia ur Rehman , Abdul Jabbar Khan, Nasir Mahmood, Shah Hassan,
Soil Dynamics and Earthquake Engineering - Volume 175, Article Number 108221
Normalization of geotechnical sustainability assessment tool (Geo-SAT) using multiple criteria decision analysis for dams
June 07, 2023
Kainat Batool, Badee Alshameri, Faisal Raza, Abbas Haider, Majid Ali,
Environment, Development and Sustainability -
Experimental Investigation of Mechanical Behavior of Geosynthetics in Different Soil Plasticity Indexes
March 01, 2023
Waqas Hassan, Khalid Farooq, Hassan Mujtaba, Badee Abdulqawi Hamood Al-Shameri, Arfan Shahzad , Muhammad Naqeeb Nawaz, Marc Azab ,
Transportation Geotechnics - Volume 39, Article Number 100935
Statistical interpolation and spatial mapping of geotechnical soil parameters of District Sargodha, Pakistan
January 10, 2023
Waqas Hassan, Muhammad Fazal Raza, Badee Abdulqawi Hamood Al-Shameri, Arfan Shahzad , Muhammad Hamza Khalid, Muhammad Naqeeb Nawaz,
Bulletin of Engineering Geology and the Environment - Volume 82, Issue 1, Article Number 37
Geospatial and statistical interpolation of geotechnical data for modeling zonation maps of Islamabad, Pakistan
December 09, 2022
Waqas Hassan, Badee Abdulqawi Hamood Al-Shameri, Muhammad Naqeeb Nawaz, Zain Ijaz, Muhammad Qasim,
Environmental Earth Sciences - Volume 81, Issue 24, Article Number 547
Experimental study on shear strength behavior and numerical study on geosynthetic-reinforced cohesive soil slope
October 05, 2022
Waqas Hassan, Badee Alshameri, Muhammad Naqeeb Nawaz, Sana Ullah Qamar,
Innovative Infrastructure Solutions - Volume 7, Issue 6, Article Number 349
A robust prediction model for evaluation of plastic limit based on sieve # 200 passing material using gene expression programming
October 03, 2022
Muhammad Naqeeb Nawaz, Sana Ullah Qamar, Badee Alshameri, Muhammad Muneeb Nawaz, Waqas Hassan, Tariq Ahmed Awan,
PLoS ONE - Volume 17(10), Article Number e0275524
The Study using Machine Learning Approach for Novel Prediction Model of Liquid Limit
September 27, 2022
Muhammad Naqeeb Nawaz, Sana Ullah Qamar, Badee Alshameri, Steve Karam , Merve Kayacı Çodur , Muhammad Muneeb Nawaz, Malik Sarmad Riaz, Marc Azab,
Buildings - Volume 12, Issue 10, Article Number 1551
Effect of Multiwalled Carbon Nanotubes (MWCNTs) on Mechanical Properties of Gypsum-treated Soil
September 25, 2022
Bilawal Hussain, Faisal Raza, Badee Alshameri, Muhammad Hamza Khalid,
International Journal of Geosynthetics and Ground Engineering - Volume 8, Article Number: 60
Assessment of the bender element sensors to measure seismic wave velocity of soils in the physical model
July 14, 2022
Badee Abdulqawi Hamood Al-Shameri,
Open Geosciences - Volume 14, Issues 1, Pages 691-705
Prediction the shear strength and shear modulus of sand-clay mixture using bender element
March 22, 2022
Badee Alshameri,
Journal of Applied Engineering Science - Volume 20, Issue 1, Pages 168-176
Effect of Coarse Content on Compaction Test
January 01, 2022
Badee Alshameri,
Civil Engineering Beyond Limits - Volume 3, Issue 1, Article Number 1506
Analysis of Gabion Retaining Wall Using Analytical and Numerical modelling with Plaxis 2D
December 31, 2021
Ahmad Ayyub, Badee Alshameri, Syed Muhammad Jamil, Muhammad Naqeeb Nawaz ,
University of Wah Journal of Science and Technology - Volume 5, Issue 1, Pages 12-19
The Influence of Mineralogy Towards Electrical Resistivity Value and Cation Exchange Capacity
December 16, 2021
Mohammad Izzat Shaffiq Azmi, Ahmad Khairul Abd Malik, Aziman Madun, Faizal Pakir, Badee Alshameri,
Journal of Sustainable Underground Exploration - Volume 1, Issue 1, Pages 52-57
Assessment of Tube Well Pumping Test Performance on Different Geological Formation
December 16, 2021
Muhd Syamir Sobri, Ahmad Khairul Abd Malik, Mohd Firdaus Md Dan, Hamzah Hussin, Badee Alshameri,
Journal of Sustainable Underground Exploration - Volume 1(1), Pages 25-31
Comparative study of various interpretative methods of the pile load test
November 24, 2021
Ahrar Mahmood, Badee Abdulqawi Hamood Al-Shameri , Muhammad Hamza Khalid, Syed Muhammad Jamil,
Innovative Infrastructure Solutions - Volume 7, Article Number 102
Experimental and Numerical Modeling of Bearing Capacity of Foundations on Soft Clay Stabilized with Granular Material
November 13, 2021
Zahra Bashir Malik, Badee Alshameri, Syed Muhammad Jamil, Daanyal Umar,
International Journal of Geosynthetics and Ground Engineering - Volume 7, Article Number 91
Prediction of California Bearing Ratio (CBR) Using Index Soil Properties and Compaction Parameters of Low Plastic Fine-Grained Soil
September 21, 2021
Jawad Hassan, Badee Abdulqawi Hamood Al-Shameri, Faizan Iqbal,
Transportation Infrastructure Geotechnology - Pages 1-13
Determination of safe depth and lateral distance of unsupported excavation near mat foundation in cohesive soils using plaxis
September 09, 2021
Muhammad Hamza Khalid, Badee Alshameri,
Journal of Applied Science and Engineering - Volume 25 (2), Pages 249-260
Application of Kriging for Development of SPT N-Value Contour Maps and USCS Based Soil Type Qualitative Contour Maps for Islamabad, Pakistan
May 31, 2021
Muhammad Hamza Khalid, Badee Alshameri, Usama Abid,
Environmental Earth Sciences - Volume 80, Issue 11, Article Number 413
Assessment of triple bottom line of sustainability for geotechnical projects
March 01, 2021
Faisal Raza, Badee Alshameri, Syed Muhammad Jamil,
Environment, Development and Sustainability - Volume 23, Pages 4521-4558
Maximum dry density of Sand-Kaolin Mixtures Predicted by using Fine Content and Specific Gravity
September 13, 2020
Badee Alshameri,
SN Applied Sciences - Volume 2, issue 10, Article Number 1693
Engineering Aspect of Sustainability Assessment for Geotechnical Projects
July 18, 2020
Faisal Raza, Badee Alshameri, Syed Muhammad Jamil,
Environment, Development and Sustainability - Pages 1-36
Comprehensive Correlations Between the Geotechnical and Seismic Data Conducted via Bender Element
May 28, 2019
Badee Alshameri, Aziman Madun,
Geotechnical and Geological Engineering - Volume 37, Issue 6, pp 5077–5095
Assessment on the Effect of Fine Content and Moisture Content Towards Shear Strength
December 01, 2017
Badee Alshameri, Aziman Madun, Ismail Bakar,
Geotechnical Engineering - Volume 48, Issue 4, Pages 76-86
Comparison of the Effect of Fine Content and Density towards the Shear Strength Parameters
June 02, 2017
Badee Alshameri, Aziman Madun, Ismail Bakar,
Geotechnical Engineering - Volume 48, Issue 2, Pages 104-110
Effect of Sensor Rotation on Assessment of Bender Element Apparatus
September 23, 2015
Badee Alshameri, Aziman Madun, Ismail Bakar, Edy Mohamad,
Jurnal Teknologi - Vol.77(11), Pages 51–57
Effect of Alignment on the Quality of Bender Element Procedure
July 30, 2015
Badee Alshameri, Ismail Bakar, Aziman Madun, Edy Mohamadd,
Jurnal Teknologi - Vol.76(2), Pages 73-80
Shear strength behaviour for older alluvium under different moisture content
March 15, 2011
Edy Mohamad, Badee Alshameri, Khairul Anuar, Rosli Saad,
Electronic Journal of Geotechnical Engineering - Vol. 16, Pages 605-617